Products
CABLES / ADAPTERS
Browse GPS tracker cables adapters for Teltonika devices, from power cords and OBD2 adapters to tachograph and FMS cables.
GPS tracker cables adapters in this category cover the wiring needed to power and connect Teltonika trackers correctly in cars, vans, trucks, and heavy-duty transport. This is a core resource for installers and fleet managers who need the exact cable for a specific tracker model and vehicle type, rather than a generic wire that may not match connector pinouts or power requirements.
The range spans simple power cords with clamp connectors for light vehicles, OBD2 adapters and splitters for plug-and-play installs, and dedicated cables for FMS, tachograph, and CAN bus integration on trucks and reefer units. Choosing the correct cable is what makes the difference between a tracker that reads vehicle data correctly and one that only reports position.
Products
TELTONIKA Power Cord with Clamp (PPCB00000530)Power Cord with Clamp for FMT100, FMC8806.20 EUR incl. VAT5.00 EUR excl. VAT
BRANCHING OBD224.01 EUR incl. VAT19.36 EUR excl. VAT
Charging Cable for Teltonika TMT250Keep your Teltonika TMT250 powered with the dedicated magnetic USB charging & configuration…18.00 EUR incl. VAT14.52 EUR excl. VAT
FMx6 series power cable with special FMS connector for heavy-duty transport (PPCB00000500)PRODUCT SPECIFICATIONS Supported by FMx6 series Technical data Number of pins: 12 Pinout:…26.99 EUR incl. VAT21.77 EUR excl. VAT
OBD 2 POWER SUPPLY PLUG FEMALE4.96 EUR incl. VAT4.00 EUR excl. VAT
OBD2 Extension CableThis OBD‑II Extension Cable is an accessory used to extend the reach of an OBD‑II connector…9.00 EUR incl. VAT7.26 EUR excl. VAT
OBD2 Extension Cable with 30cmCable length 30 cm9.00 EUR incl. VAT7.26 EUR excl. VAT
OBDII SPLITTER WhiteA compact OBD splitter is a compact device that plugs into a vehicle’s OBD‑II port, providing…23.99 EUR incl. VAT19.35 EUR excl. VAT
TELTONIKA 12-PIN Power Cable for Cigarette Lighter Socket (PPCB00000250)20.00 EUR incl. VAT16.13 EUR excl. VAT
TELTONIKA CARRIER REEFER CABLE (PPCB00000460)Cable length 70 cm Supported Carrier refrigerators models Vector 1800, Vector 1850, Vector…30.00 EUR incl. VAT24.19 EUR excl. VAT
Teltonika FMx6 serie 9-PIN Cable (PPCB00007240)Supported by FMx6 series Technical data Number of pins 9 Pinout PIN B: VDC PIN A: GND PIN C:…23.00 EUR incl. VAT18.55 EUR excl. VAT
TELTONIKA FMX9 Power Cable for Power Supply (PPCB00001610)20.00 EUR incl. VAT16.13 EUR excl. VAT
Teltonika FMx9xy Power Supply Cable without Fuse Box (PGWS00006010)1.5 m-long power cable for FMX9YX series devices without fuse box4.03 EUR incl. VAT3.25 EUR excl. VAT
Teltonika FMx9yx Power Supply Cable with Fuse Box (PGWS00007010)1.5 m-long power cable for FMB9YX series devices with a fuse box. Product description: Power…7.01 EUR incl. VAT5.65 EUR excl. VAT
Teltonika OBD II TO FMS ADAPTER AND J1939 SUPPORT IN FMx003 (PGCB00007950)Due to recently added support of J1939, Teltonika OBD devices (FMB003, FMC003, FMM003) are now…22.00 EUR incl. VAT17.74 EUR excl. VAT
Teltonika PGWS00007030 FMx12x FMx13x 1.5 M POWER CABLE1.5 m-long power cable for FMx12x & FMx13x series devices with a fuse box. Product description…5.00 EUR incl. VAT4.03 EUR excl. VAT
TELTONIKA Power cable main connector for FMB140 (PPCB00000480)Teltonika power and communication cable for FMB1405.03 EUR incl. VAT4.06 EUR excl. VAT
TELTONIKA Power cable with clamp connectors (PPWS00000680)6.20 EUR incl. VAT5.00 EUR excl. VAT
TELTONIKA SIEMENS TACHOGRAPH FRONT PANEL CABLE (PPEX00008070)Supported Tachographs Siemens VDO DTCO 1.3a, 1.4, 2.0, 2.1, 2.2, 3.0, 4.0 Supported by FMx6…30.00 EUR incl. VAT24.19 EUR excl. VAT
Teltonika Tacho Cable PPCB00000010Teltonika PPCB00000010 is a specialized tachograph cable designed for use with Teltonika FMx6…14.00 EUR incl. VAT11.29 EUR excl. VAT
Why the right cable matters
A tracker is only as good as its connection to the vehicle. Using the wrong power cable can mean no ignition detection, no access to CAN bus data such as fuel level, odometer, or engine hours, and in some cases an unstable power supply that causes the device to restart or lose configuration. For heavy-duty transport, the wrong harness can also mean losing tachograph or FMS data entirely, which is often the main reason the tracker was installed in the first place.
Installers working across mixed fleets, passenger cars, vans, and trucks, need the matching cable for each tracker and vehicle combination on hand, since a single generic cable rarely covers all cases properly.
How to choose the right cable or adapter
Start from the tracker model, since Teltonika cables are built around specific connector types such as the 12-pin, 9-pin, or FMS connectors used on FMx6, FMx9, and FMx12/FMx13 series devices. Then consider the vehicle and installation method.
- OBD2 adapters and splitters suit light vehicles where a plug-and-play connection to the OBD2 port is available, including the OBDII splitter for sharing the port with other devices.
- Power cords with clamp connectors suit installs where you are wiring directly to the vehicle's power and ignition lines.
- FMS and J1939 adapters, including the OBD II to FMS adapter, bring CAN bus data into trackers that support it, useful for fuel, mileage, and engine diagnostics.
- Tachograph cables, such as the Siemens tachograph front panel cable and the Teltonika Tacho cable, connect trackers to the tachograph for compliance and driver data on trucks.
- Dedicated cables like the carrier reefer cable serve refrigerated transport setups with their own connector requirements.
- Extension cables are useful when the OBD2 port and the chosen mounting location for the tracker are far apart.
Installation and what the subscription includes
Cables and adapters are a one-time hardware purchase tied to the installation itself; they are independent of the ongoing subscription. Installation, whether OBD2 plug-in or direct wiring with a power cord and clamps, should be done so ignition state and any CAN/FMS data are read correctly from the start, since reconfiguring wiring later is more work than getting it right during installation.
Once wired correctly, the tracker connects through our own SIM card to our platform, giving you live tracking, alerts, and apps without needing to source data connectivity separately. A tracker set up without a subscription can still be powered correctly by the right cable, but it will not transmit position, alerts, or vehicle data anywhere, since the cable only handles power and data pickup from the vehicle, not the connection to a platform.
Real use cases
A fleet manager converting a van fleet to OBD2 trackers uses the OBD2 power supply plug and extension cables to mount devices cleanly out of sight. A transport company tracking trucks with tachographs uses the Tacho cable alongside an FMS adapter to pull both compliance and engine data into one platform. A reefer transport operator uses the carrier reefer cable to monitor refrigeration units alongside vehicle position.
Frequently asked questions
How do I know which cable fits my Teltonika tracker?
Match the cable to your exact tracker model and series, since connector types differ between the FMx6, FMx9, FMx12/13, and other series. Tell us your model and we can confirm the right cable.
Can I just use the OBD2 port instead of wiring the tracker directly?
Yes, where the tracker and vehicle support it, an OBD2 adapter gives a plug-and-play install without cutting into wiring, though direct wiring can offer more flexible mounting.
Do I need a special cable for trucks with tachographs?
Yes, tachograph integration requires a dedicated cable such as the Tacho or Siemens front panel cable, separate from the standard power cable.
Does the cable affect my subscription or data plan?
No. Cables and adapters only handle power and vehicle data pickup; the live tracking, alerts, and platform access come from the SIM and subscription, independent of the wiring used.